DOPCFCL=0, OMS=00, DCSEL=0
DOC Control Register
| OMS | Operating Mode Select 0 (00): Data comparison mode 1 (01): Data addition mode 2 (10): Data subtraction mode 3 (11): Setting prohibited |
| DCSEL | Detection Condition Select 0 (0): DOPCF is set when data mismatch is detected. 1 (1): DOPCF is set when data match is detected. |
| Reserved | These bits are read as 00. The write value should be 00. |
| DOPCF | Data Operation Circuit Flag Indicates the result of an operation. |
| DOPCFCL | DOPCF Clear 0 (0): Maintains the DOPCF flag state. 1 (1): Clears the DOPCF flag. |
| Reserved | This bit is read as 0. The write value should be 0. |